CERAKOTE

CERAKOTE

(Certified Cerakote Applicator)

 

Q: What is Cerakote?

A: Cerakote is a Polymer-Ceramic Composite coating that can be applied to metals, plastics, polymers and wood. The unique formulation used for Cerakote ceramic coating enhances a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength, and hardness. Each of these properties is rigorously tested to guarantee that Cerakote products remain at the forefront of the ceramic coatings market. Cerakote ceramic coatings utilize state-of-the-art technology to out-perform any competitive coating in both laboratory settings and real world applications.

 

 

Multiple Colors and Stencils Available

http://www.cerakoteguncoatings.com/finishes/?tab=coatings&cat=HSERIES

 

See the Cerakote Difference

http://www.cerakoteguncoatings.com/testing/

 

 

 

 

NIC Certified Cerakote Application - All Prices INCLUDE 1 Hour of Labor
All Labor in Excess of 1 Hour will be charged in addition to the prices below. Labor is $75/Hour.

 

 

Cerakote Packages Include 1 In Stock Color Only. Additional Colors, Stencils and Patterns will be charged in addition to the prices below. All Labor in Excess of 1 Hour will be charged in addition to the prices below. Labor is $75/Hour.

 

- AR-15 – Upper Receiver / Lower Receiver / Up to 12" Handguard….$250 (Does Not Include Small or Internal Parts)
- AR-15 – Everything Listed Above Plus - Barrel, Gas Block, Tube, Buffer Tube….$350
- Full Size Pistol….$200 (4.5" or Larger Barrel)
- Carry/Medium Pistol….$175 (4.00" - 4.25")
- Compact Pistol....$150 (Less than 4.00" Barrel)
- Full Size Revolver...$225 (4.5" or Larger Barrel)
- Carry/Medium Revolver...$200 (4.00" - 4.25" Barrel)
- Snub Nose Revolver....$175
- Bolt Action Stock (No Wood) / Action / Barrel (Up to 24")….$250 (Includes Bolt Handle)
- Shotgun(No Wood) / Receiver / Barrel / Magazine Tube....$250 / $275 DOUBLE BARREL

 

 

NIC Certified Cerakote Application for Individual Firearm Parts & Accessories - All Prices INCLUDE 1 Hour of Labor.

 

- AR-15 Upper Receiver….$85 (Must Be Completely Stripped to Avoid Additional Gunsmithing Labor Charge)
- AR-15 Lower Receiver….$105 (Must Be Completely Stripped to Avoid Additional Gunsmithing Labor Charge)
- AR-15 12" Handguard….$140 (Price for Shorter or Longer will be determined at drop off)
- AR-15 16" Barrel….$80 (Price for Shorter of Longer will be determined at drop off)
- Pistol Slide (Medium/Large)….$75
- Pistol Slide (Compact) ....$65
- Pistol Frame (Medium/Large)….$105
- Pistol Frame (Compact)....$75
- Bolt Action and Barrel (Up to 24")….$175 (Includes Bolt Handle)
- Shotgun Receiver and Barrel….$175 Single $200 Double (Does Not Include Magazine Tube)
- Bolt Action Stock (No Wood)….$125
- Shotgun Stock (No Wood)….$90
- Shotgun Magazine Tube....$75

 

 

**There will be an additional charge for each special order Cerakote Color that we do not stock**
**There will be an additional $75 Hourly Labor Charge for Cleaning, Disassembly and Reassembly**
**Add $40 Additional Per **In Stock** Color Per Item. NIC MSRP Plus $20 Per OUT OF STOCK Color**
**Labor Charges May Consist of Necessary Cleaning, Out-Gas, Wracking, Stripping & Blasting, Custom Paint Mixing, Spraying, Stencil Addition & Removal, and Loading In & Out**

 

 

***Optics****

 

Depending on the Manufacturer some Optics may not be Blasted or Oven Cured. This will require hand sanding and air curing in order to achieve the desired look. Hand Sanding is extremely Labor Intensive and High Temp Air Cure Cerakote is MORE expensive than Oven Curred Cerakote. Optics in general are much more expensive due to the careful nature of taping, covering, and overall sensitive care they require in comparison to steel and aluminum.

 

**Cerakote Labor Rate of $75/hr with a Minimum of 1 Hour Charged Unless Previously Discussed**

 

 

DLD AR15 Short Barrel Rifle with Multicam Cerakote